Printing sewing patterns

Thanks karmalady I'm planning to make it as a top first with a view to make a dress if I'm happy with it

You don`t have a shoulder seam as such with raglan, so having a lower shoulder should not affect the garment on you. The neck will be where it should be and the sleeves will look fine in my opinion. If in doubt then use a fabric that you don`t really love and make a wearable toile

karmalady I'm going to make the Sinclair Iris raglan top and haven't sewn raglan before. I usually have to adjust my right shoulder seam & armhole as that shoulder is lower than the other. Do you think I will have to make adjustments for a raglan sleeve too?

forget me not helmi blouse. I printed size 40 in med bust and am just about to prep for a wearable toile, peter pan collar and slit neck. I am 4`10 with normal length torso (short legs) and southerly facing bust, rounded shoulders, all typical for age 75. PDF makes some alterations easier as A4 joins are good markers

move the whole dart down by 1". Cut rectangle and fill in the top 1" space left. Smooth sides with a pencil

1/2" added to high back, just under neckline. Pivot with a slit each side of seamline reinforced dot (scotch tape

Add 1/4" to back shoulder (arm edge) to bring it forward a tad. Take away 1/4" from front shoulder to compensate

That is it, all the adjustments and they are very easy to do and to be accurate

It is a lovely pattern with several variations, getting this first fit right will make it a tnt pattern

Eddiecat, I have jemma but not iris. My fav sinclair pattern was bondi t, I loved it and made about six more. The best fabric for them was see you at six and that was me hooked on sinclair

Now I am in harlene dungaree mode. I did the wearable toile, in a slightly stretch denim, in a 10 for dd and took it to her yesterday. It is fab, utterly lovely. I want another pair for myself and will also be making her another one. Spending money on fabrics is so endorphic, puts me on a real high. I have ordered a good denim for hers and a bedford cord for me, or I may swap them around. I ordered 2.5m of each as you have to allow for shrinkage when pre-washing. Cost me about £50 per pair which includes the metalwork. Value after making, easily £150 each as the quality is amazing

Thank goodness for sewing. It is pouring down and I need a positive something in my day

I’m loitering here picking up tips and encouragement so fell free to drop in and add to the thread. Experience and advice is always a valuable commodity ❤️

I bought 2 patterns in the Sinclair bogof sale - Jemma and Iris. I live near to Higgs and Higgs and intend to go next week as I've several projects planned for the autumn/winter

wd foxygloves

Just saying, I am wearing a flannel plaid ashton top with short sleeves. big red/blue/white squares and only made it because I had a bit of flannel left over. I wasn`t sure about fabric and the ashton pattern combo but it is fab, hangs so well on me. Looks amazing.

So ashton by helens closet is again endorsed by me, with the sleeve addition. I have enough room under for ITS hepburn, which is negative ease. I am thinking maybe 2/3 of a metre for the sleeveless version, which can be used a bodywarmer too. Multi use of one pattern and it is a good one to do on A4, not many pieces and nothing too big plus cup sizes

Anyone dithering about stylearc. I am making logan shacket and all the instructions are on the sheet. No skim reading though. It is such an easy sew. I recommend it. I have gone down a size as it is roomy

Oh get a life, spammer! You are fooling nobody.
Reported.

Message deleted by Gransnet. Here's a link to our Talk guidelines.

and some patterns have different seam allowances written on their instructions eg 5/8 (1.5cm) on the sideseams and 3/8 (1cm) on collar seams.

Unfortunately the seam allowances are often hard to find. I always write them down on the pattern envelope when I do find them

3/8 or 5/8 are mostly used. I do prefer 3/8 these days. I had a pattern once with a ridiculous 2/8.

Sidelined - just to point out that pdf patterns often have smaller seam allowances than the may be used to - especially the ones for jersey. I always add extra as my sewing machine is happier with that, but it's especially important in areas where you may need to adjust for size (eg my middle!)

I had to come on here again. Some info for you that may well change how your clothes fit and feel on you. Rounded back and forward shoulders affect most of us and personally, I realised that this was my problem when a trapeze dress tried to strangle the front of my neck by pulling back.

This easy solution is definitely worth following, the easiest way I have ever seen. Personally I give my back 1/2" and my shoulder 1/4" and all my patterns now fit in that area. This is for sleeveless or for set in sleeves

www.youtube.com/watch?v=jJomOnlYmZA

I had a sub to simply sewing for a year. Each monthly issue has three free paper patterns, all good ones by known indie designers, albeit instructions are minimal. In 12 months I had 36 patterns and gave most to the cs as they were not to my style. However I am wearing a JL blouse from one, called aisling and she even provided a link for different cup sizes, so I downloaded the c cup and the blouse is lovely. So much so that I am planning to make a couple more

I have been to the shops and realised that I am wearing all hand made ie JL aisling blouse in a thinner printed linen that drapes, stylearc barbs pants in a bengaline, stylearc used to send small swatches of suitable fabrics Topped with stylearc logan shacket in robert kaufman shetland flannel speckle

None of these were difficult to make and all true to size

PinkCosmos I've used a few of the Prima patterns recently and, as Susie42 says, they do come out on the big side. I've also found a couple of mistakes on the patterns - for instance on one cross-over top, the waistband length didn't take into account the darts on the bodice so was too long, but it was easy to alter to fit.

I have the pattern and have the fabric, so today I am going to cut out another logan shacket from stylearc. It is a very popular item and the one I already made fits perfectly. I need to use stash and have some robert kaufman mammoth plaid flannel, in bright and cheery reds

I bought the flannel to make a dress but I find flannel too sticky on my legs. It is perfect for a shacket and there will be enough left for a button-down shirt. The pattern did not need any prepping to fit me, sizing is perfect

www.stylearc.com/shop/sewing-patterns/logan-shacket/

The bust point one is valuable, bust point on pattern needs to be held against your figure. As we age, bust point lowers and needs to be adjusted on pattern, cut out the rectangle on pattern, lower it and fill in the gap with paper and smooth the side lines. pattern darts cannot be one position to fit all from 18 to 80. Just take your time and use the tape that you can lift off. Another good reason to trace or use proper paper,not tissue

liftingpinsandneedles on youtube is like being a fly on the wall sidelined

Also beyondthepinkdoor has very good sewalongs. Watch her knicker-making one to start.

, karmalady I’d like to be a fly on the wall so I could watch you adjusting and tweaking. It’s the best way to learn 😉

I finished M and M ellsworth, it is lovely on and I have ordered some good white linen to make another. Not an easy sew by any means and the right fabric is crucial.

I have also just cut out my second fielder dress for my wardrobe that pattern needed the dart lowering on the pattern. The first toile didn`t fit, I persisted with pattern alteration by using some cheap flammable fabric from stash, very roughly sewn together. To make that fit perfectly I went up a size and lowered the dart on the pattern itself and that resulted in a lovely dress. I found some robert kaufman essex linen in my stash for the one I cut today, beautiful fabric and lasts wash after wash for years

Multiple uses of a particular pattern pleases me as patterns are very expensive.

I only ever abandoned one stylearc pattern, the kristen dress. It fitted me well at the shoulders but I could not be bothered altering the rest of it.

I've found that Prima patterns come up very big so check the measurements carefully. I like Style Arc as they always fit me without alteration.

*suits

I have been collecting the patterns that come with Prima magazine with the intention of getting back into to sewing.

I realise that they are double sided so I would need to trace one side.

Ha anyone used them? Are they OK? They seem fairly basic, which sits me.

sidelined yes inflammable nighties and open fires were a lethal mix. Finger is ok now, waiting for blister healing

I love sinclair patterns and they have a bogof sale, there is a link below this video. Karina is inspiring. I have the sofia pdf and will be making the top

www.youtube.com/watch?v=xKRLjc7cPXg